Gbs-elektronik MCA-527 Firmware Commands Bedienungsanleitung PDF herunterladen (Seite 29)

Description of the MCA527 Firmware Commands

Command name

CMD_QUERY_POWER (Continuation)

Result data array

Byte offset 72 +12V primary current [mA] at stop unsigned long

Byte offset 76 -12V primary current [mA] at stop unsigned long

Byte offset 80 +24V primary current [mA] at stop unsigned long

Byte offset 84 -24V primary current [mA] at stop unsigned long

Byte offset 88 Battery voltage [mV] at stop unsigned long At the MCA527Micro this data

corresponds to the USB input

voltage.

Byte offset 92 HV [ * 1.2 V] at stop unsigned long

Byte offset 96 ADC correction offset on SUB-D9 pin3 [LSB] char

Byte offset 97 Gain correction factor on SUB-D9 pin3 char factor = 0.001 * value + 1

Byte offset 98 unused 2 bytes

Byte offset 100 +12V actual value [ * 0.0625 V] at stop unsigned char

Byte offset 101 -12V actual value [ * 0.0625 V] at stop unsigned char

Byte offset 102 +24V actual value [ * 0.125 V] at stop unsigned char

Byte offset 103 -24V actual value [ * 0.125 V] at stop unsigned char

Byte offset 104 Voltage on SUB-D9 pin3 [ * 0.3125 mV] at stop unsigned short

Byte offset 106 Command flag and parameters 8 bytes

Byte offset 114 Voltage on SUB-D9 pin5 [ * 0.3125 mV] at stop unsigned short

Byte offset 116 Charger current [mA] at stop unsigned long

Byte offset 120 unused 6 bytes

Byte offset 126 Checksum unsigned short

Byte offset 128 MCA state integer value

STATE_READY = 1

STATE_RUN = 2

STATE_SUSPEND = 3

STATE_FINISH = 4

STATE_STOP = 5

STATE_FAIL = 6

STATE_WAIT_FOR_TRIGGER = 7

Byte offset 130 unused 2 bytes

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 53 54

Keine Kommentare

Gbs-elektronik MCA-527 Firmware Commands Bedienungsanleitung Seite 29